THOR RE-9820-01D Electronic Eyelet Button Hole Keyhole Sewing Machine for Suits and Trousers

Electronic buttonhole machine, 1-needle, 2-thread with the possibility of sewing a third reinforcing thread (cord). The machine can sew holes with or without eyelet, with knife cut before or after sewing, with concurrent or cross bartack or without, as well as round eyelets (a change of knife and cutting block is required). Energy-saving servo motor built into the machine head and stepper motors controlling individual mechanisms.

The most important parameters include type and size of buttonhole sewing, cutting method, sewing speed, are programmed using a modern, readable control panel. For each type of buttonhole it is possible to program the shape, width, type of cut, etc. individually.

The programming function of cycle sewing of several different types of holes, option through which we can sew holes in the product without having to move the machine. Quick change of the buttonhole type, without difficult mechanical adjustments, gives the machine an ideal character for short series production, with high variability of patterns.

The construction of the head enables longitudinal sewing of holes on long elements.

FEATURES:

• Sewing speed: up to 2,500 stitches / min
• Stitch length: 0.5-2.0 mm
• Stitch width: 1.5-4.0 mm
• Length of the stitched hole: 8-42 mm (buttonhole with eyelet), 5-42 mm (straight hole)
• Round hole diameter (OPTION) – 3mm, 4mm or 5mm
• Foot lifting height: 12 mm standard (up to 16 mm optional)
• Gimpy sewn in: yes
• Thread cutting: yes
• Needle system: DOx558
• Air consumption: 43.2 l / min (8 cycles / min)
• 220V Single Phase Factory Power, 110 Volt Conversion Installed Free